Vulnerabilities | |||||
---|---|---|---|---|---|
Version | Suggest | Low | Medium | High | Critical |
7.4.4 | 0 | 0 | 0 | 0 | 0 |
7.4.3 | 0 | 0 | 0 | 0 | 0 |
7.4.2 | 0 | 0 | 0 | 0 | 0 |
6.0.4 | 0 | 0 | 0 | 0 | 0 |
6.0.3 | 0 | 0 | 0 | 0 | 0 |
6.0.2 | 0 | 0 | 0 | 0 | 0 |
6.0.1 | 0 | 0 | 0 | 0 | 0 |
6.0.0 | 0 | 0 | 0 | 0 | 0 |
0.0.42 | 0 | 0 | 0 | 0 | 0 |
0.0.41 | 0 | 0 | 0 | 0 | 0 |
0.0.40 | 0 | 0 | 0 | 0 | 0 |
0.0.39 | 0 | 0 | 0 | 0 | 0 |
0.0.38 | 0 | 0 | 0 | 0 | 0 |
0.0.37 | 0 | 0 | 0 | 0 | 0 |
0.0.36 | 0 | 0 | 0 | 0 | 0 |
0.0.35 | 0 | 0 | 0 | 0 | 0 |
0.0.34 | 0 | 0 | 0 | 0 | 0 |
0.0.33 | 0 | 0 | 0 | 0 | 0 |
0.0.32 | 0 | 0 | 0 | 0 | 0 |
0.0.31 | 0 | 0 | 0 | 0 | 0 |
0.0.30 | 0 | 0 | 0 | 0 | 0 |
0.0.29 | 0 | 0 | 0 | 0 | 0 |
7.4.4 - This version is safe to use because it has no known security vulnerabilities at this time. Find out if your coding project uses this component and get notified of any reported security vulnerabilities with Meterian-X Open Source Security Platform
Maintain your licence declarations and avoid unwanted licences to protect your IP the way you intended.
MIT - MIT LicenseThe repository for high quality TypeScript type definitions.
You can also read this README in Español, 한국어, Русский, 简体中文, Português, Italiano, 日本語 and Français!
Link to Admin manual
Definitely Typed has recently changed to a proper pnpm
monorepo; you may want to reread this document for changes to the layout of packages in this repo.
At the very least, you may want to git clean -fdx
the repo (or node ./scripts/clean-node-modules.js
on Windows) to clean up node_modules
and run pnpm install --filter .
to install the workspace root. See further sections for more info on pnpm install
.
This section tracks the health of the repository and publishing process. It may be helpful for contributors experiencing any issues with their PRs and packages.
If anything here seems wrong or any of the above are failing, please let us know in the Definitely Typed channel on the TypeScript Community Discord server.
See the TypeScript handbook.
This is the preferred method. For example:
npm install --save-dev @types/node
To install typings for a scoped module, remove the @
and add double-underscore after the scope. For example, to install typings for @babel/preset-env
:
npm install --save-dev @types/babel__preset-env
The types should then be automatically included by the compiler.
You may need to add a types
reference if you're not using modules:
/// <reference types="node" />
See more in the handbook.
For an npm package "foo", typings for it will be at "@types/foo".
If your package has typings specified using the types
or typings
key in its package.json
, the npm registry will display that the package has available bindings like so:
If you still can't find the typings, just look for any ".d.ts" files in the package and manually include them with a /// <reference path="" />
.
Definitely Typed only tests packages on versions of TypeScript that are less than 2 years old.
@types
packages have tags for versions of TypeScript that they explicitly support, so you can usually get older versions of packages that predate the 2-year window.
For example, if you run npm dist-tags @types/react
, you'll see that TypeScript 2.5 can use types for react@16.0, whereas TypeScript 2.6 and 2.7 can use types for react@16.4:
Tag | Version |
---|---|
latest | 16.9.23 |
ts2.0 | 15.0.1 |
... | ... |
ts2.5 | 16.0.36 |
ts2.6 | 16.4.7 |
ts2.7 | 16.4.7 |
... | ... |
master
branch of this repository and place them in your projectYou may need to add manual references.
Definitely Typed only works because of contributions by users like you!
Before you share your improvement with the world, use the types yourself by creating a typename.d.ts
file in your project and filling out its exports:
declare module "libname" {
// Types inside here
export function helloWorldMessage(): string;
}
You can edit the types directly in node_modules/@types/foo/index.d.ts
to validate your changes, then bring the changes to this repo with the steps below.
Alternatively, you can use module augmentation to extend existing types from the DT module or use the declare module
technique above which will override the version in node_modules
.
Add to your tsconfig.json
:
"baseUrl": "types",
"typeRoots": ["types"],
Create types/foo/index.d.ts
containing declarations for the module "foo".
You should now be able to import from "foo"
in your code and it will route to the new type definition.
Then build and run the code to make sure your type definition actually corresponds to what happens at runtime.
Once you've tested your definitions with real code, make a PR then follow the instructions to edit an existing package or create a new package.
Once you've tested your package, you can share it on Definitely Typed.
First, fork this repository, clone it,
install node and run pnpm install
. Note that pnpm install
will install the entire
repository, including packages you may not be editing. If you'd like to install only a subset,
you can run pnpm install -w --filter "{./types/foo}..."
to install @types/foo
and all of
its dependencies. If you need to run tests for packages that depend on @types/foo
, you can run pnpm install -w --filter "...{./types/foo}..."
to pull in all related packages for testing.
[!NOTE] If you are using Windows, you may find that
git clean
does not remove thenode_modules
directory or hangs when doing so. If you need to removenode_modules
, you can runpnpm clean-node-modules
to reset the repo.
We use a bot to let a large number of pull requests to DefinitelyTyped be handled entirely in a self-service manner. You can read more about why and how here. Here is a handy reference showing the life cycle of a pull request to DT:
You can clone the entire repository as per usual, but it's large and includes a massive directory of type packages. This will take some time to clone and may be unnecessarily unwieldy.
For a more manageable clone that includes only the type packages relevant to you, you can use git's sparse-checkout
and --filter
features. This will reduce clone time and improve git performance.
⚠️ This requires minimum git version 2.27.0, which is likely newer than the default on most machines. More complicated procedures are available in older versions, but not covered by this guide.
git clone --sparse --filter=blob:none <forkedUrl>
--sparse
initializes the sparse-checkout file so the working directory starts with only the files in the root of the repository.--filter=blob:none
will including all commit history but exclude files, fetching them only as needed.git sparse-checkout add types/<type> types/<dependency-type> ...
pnpm test <package to test>
.When you make a PR to edit an existing package, dt-bot
should @-mention the package's owners.
If it doesn't, you can do so yourself in the comment associated with the PR.
If you are the library author and your package is written in TypeScript, bundle the generated declaration files in your package instead of publishing to Definitely Typed. You can also generate declaration files from JavaScript files, using JSDoc for type annotations.
If you are adding typings for an npm package, create a directory with the same name.
If the package you are adding typings for is not on npm, make sure the name you choose for it does not conflict with the name of a package on npm.
(You can use npm info <my-package>
to check for the existence of the <my-package>
package.)
Your package should have this structure:
File | Purpose |
---|---|
index.d.ts |
This contains the typings for the package. |
<my-package>-tests.ts |
This contains sample code which tests the typings. This code does not run, but it is type-checked. |
tsconfig.json |
This allows you to run tsc within the package. |
.eslintrc.json |
(Rarely) Needed only to disable lint rules written for eslint. |
package.json |
Contains metadata for the package, including its name, version and dependencies. |
.npmignore |
Specifies which files are intended to be included in the package. |
Generate these by running npx dts-gen --dt --name <my-package> --template module
.
See all options at dts-gen.
If you have .d.ts
files besides index.d.ts
, make sure that they are referenced either in index.d.ts
or the tests.
Definitely Typed members routinely monitor for new PRs, though keep in mind that the number of other PRs may slow things down.
For a good example package, see base64-js.
When a package bundles its own types, types should be removed from Definitely Typed to avoid confusion.
You can remove it by running pnpm run not-needed <typingsPackageName> <asOfVersion> [<libraryName>]
.
<typingsPackageName>
: This is the name of the directory to delete.<asOfVersion>
: A stub will be published to @types/<typingsPackageName>
with this version. Should be higher than any currently published version and should be a version of <libraryName>
on npm.<libraryName>
: Name of npm package that replaces the Definitely Typed types. Usually this is identical to <typingsPackageName>
, in which case you can omit it.If a package was never on Definitely Typed, it does not need to be added to notNeededPackages.json
.
Test your changes by running pnpm test <package to test>
where <package to test>
is the name of your package.
You need to run this from the DefinitelyTyped directory because individual package.jsons don't define test scripts.
This script uses dtslint to run the TypeScript compiler against your dts files.
Once you have all your changes ready, use pnpm run test-all
to see how your changes affect other modules.
dtslint includes module format and package.json
configuration checks from @arethetypeswrong/cli. The checks run only if a SemVer-major-compatible implementation package can be found on npm to compare against the DefinitelyTyped package. (DefinitelyTyped packages marked as nonNpm
in their package.json
are skipped.)
Many packages currently fail the attw
checks and need to be fixed. To allow us to make incremental progress, failed attw
checks do not fail the dtslint
run when the package is listed in failingPackages
in attw.json
, but they will still be reported in the pnpm test my-package
output. If you fix the package, remove it from failingPackages
so that attw
checks can start failing dtslint
runs.
All problems reported by attw
have documentation linked in the output. Some rules of thumb to help avoid problems:
The package.json
in the DefinitelyTyped package must have matching type
and exports
fields if the implementation package uses them in its package.json
. For example, if an implementation package.json
looks like:
{
"name": "my-package",
"version": "1.0.1",
"type": "module",
"main": "dist/cjs/index.cjs",
"exports": {
".": {
"import": "./dist/esm/index.js",
"require": "./dist/cjs/index.cjs"
},
"./subpath": {
"import": "./dist/esm/subpath.js",
"require": "./dist/cjs/subpath.cjs"
}
}
}
then the DefinitelyTyped package.json
should look something like:
{
"name": "@types/my-package",
"version": "1.0.9999",
"type": "module",
"types": "index.d.ts",
"exports": {
".": {
"import": "./index.d.ts",
"require": "./index.d.cts"
},
"./subpath": {
"import": "./subpath.d.ts",
"require": "./subpath.d.cts"
}
}
}
Notice that each exports
subpath is reflected, and each JavaScript file has a corresponding declaration file with a matching file extension—a .d.ts
file types a .js
file, not a .mjs
or .cjs
file!
When the implementation package uses module.exports = ...
, the DefinitelyTyped package should use export =
, not export default
. (Alternatively, if the module.exports
is just an object of named properties, the DefinitelyTyped package can use a series of named exports.) The most common obstacle to correcting this problem is confusion about how to export types in addition to the primary export. For example, assume these types are incorrectly using export default
:
export interface Options {
// ...
}
export default function doSomething(options: Options): void;
Changing the export default
to an export =
creates an error:
export interface Options {
// ...
}
declare function doSomething(options: Options): void;
export = doSomething;
// ^^^^^^^^^^^^^^^^^
// Error: An export assignment cannot be used in a module with other exported elements.
To fix this, move the types inside a namespace with the same name as the function:
declare namespace doSomething {
export interface Options {
// ...
}
}
declare function doSomething(options: doSomething.Options): void;
export = doSomething;
If you need help fixing a problem, please ask in the DefinitelyTyped channel on the TypeScript Community Discord server.
If you are adding typings for an npm package, create a directory with the same name.
If the package you are adding typings for is not on npm, set "nonNpm": true
in the package.json
, and make sure the name you choose for it does not conflict with the name of a package on npm.
(You can use npm info <my-package>
to check for the existence of the <my-package>
package.)
In rare occasions, nonNpm
may be set to "conflict"
, which incidates that there is a package on npm with the same name, but the types intentionally conflict with that package.
This can be true for packages which define an environment like @types/node
or for dummy packages like aws-lambda
. Avoid using "conflict"
where possible.
There should be a <my-package>-tests.ts
file, which is considered your test file, along with any *.ts
files it imports.
If you don't see any test files in the module's folder, create a <my-package>-tests.ts
.
These files are used to validate the API exported from the *.d.ts
files which are shipped as @types/<my-package>
.
They do not themselves ship.
Changes to the *.d.ts
files should include a corresponding *.ts
file change which shows the API being used, so that someone doesn't accidentally break code you depend on.
For example, this change to a function in a .d.ts
file adding a new param to a function:
index.d.ts
:
- export function twoslash(body: string): string
+ export function twoslash(body: string, config?: { version: string }): string
<my-package>-tests.ts
:
import {twoslash} from "./"
// $ExpectType string
const result = twoslash("//")
+ // Handle options param
+ const resultWithOptions = twoslash("//", { version: "3.7" })
+ // When the param is incorrect
+ // @ts-expect-error
+ const resultWithOptions = twoslash("//", { })
If you're wondering where to start with test code, the examples in the README of the original package are a great place to start.
You can validate your changes with npm test <package to test>
from the root of this repo, which takes changed files into account.
Use $ExpectType
to assert that an expression is of a given type and @ts-expect-error
to assert that a compile error. Examples:
// $ExpectType void
f(1);
// @ts-expect-error
f("one");
For more details, see dtslint readme.
If for some reason a lint rule needs to be disabled, disable it for a specific line:
// eslint-disable-next-line no-const-enum
const enum Const {
One,
}
const enum Enum { // eslint-disable-line no-const-enum
Two,
}
You can still disable rules with an .eslintrc.json, but should not in new packages. Disabling rules for the entire package makes it harder to review.
tsconfig.json
should have noImplicitAny
, noImplicitThis
, strictNullChecks
and strictFunctionTypes
set to true
.
You may edit the tsconfig.json
to add new test files, to add "target": "es6"
(needed for async functions), to add to "lib"
or to add the "jsx"
compiler option.
TL;DR: esModuleInterop
and allowSyntheticDefaultImports
are not allowed in your tsconfig.json
.
These options make it possible to write a default import for a CJS export, modeling the built-in interoperability between CJS and ES modules in Node and in some JS bundlers:
// component.d.ts declare class Component {} // CJS export, modeling `module.exports = Component` in JS export = Component; // index.d.ts // ESM default import, only allowed under 'esModuleInterop' or 'allowSyntheticDefaultExports' import Component from "./component";Since the compile-time validity of the import in
index.d.ts
is dependent upon specific compilation settings, which users of your types do not inherit, using this pattern in DefinitelyTyped would force users to change their own compilation settings, which might be incorrect for their runtime. Instead, you must write a CJS import for a CJS export to ensure widespread, config-independent compatibility:// index.d.ts // CJS import, modeling `const Component = require("./component")` in JS import Component = require("./component");
This file is required and should follow this template:
{
"private": true,
"name": "@types/PACKAGE-NAME",
"version": "1.2.9999",
"projects": [
"https://aframe.io/"
],
"dependencies": {
"@types/DEPENDENCY-1": "*",
"@types/DEPENDENCY-2": "*"
},
"devDependencies": {
"@types/PACKAGE-NAME": "workspace:."
},
"owners": [
{
"name": "Your Name Here",
"githubUsername": "ghost"
}
]
}
A package.json
specifies all dependencies, including other @types
packages.
You must add non-@types
dependencies to the list of allowed external dependencies.
Pikaday is a good example.
These additions are approved by a maintainer, which gives us the chance to make sure that @types
packages don't depend on malicious packages.
If the implementation package uses ESM and specifies "type": "module"
, then you should modify package.json to match:
{
"type": "module"
}
This also applies if the implementation package has exports
in its package.json.
Definitely Typed allows peerDependencies
in package.json
.
Peer dependencies can help prevent situations where a package manager unexpectedly installs too-new versions or more than one version of the same package.
However, peer dependencies have downsides; package managers differ in their handling of peer dependencies (e.g., yarn
does not auto-install them, npm
requires --legacy-peer-deps
for mismatches).
As such, PRs introducing new peer dependencies require maintainer approval and should be limited to specific circumstances.
In general, types packages should only have a peer dependency if the upstream package has a peer dependency on the same package (or its types).
For example, a DT package for a React component can specify a peer dependency on @types/react@*
, as the consumer will have needed to install @types/react
to use JSX in the first place.
If the consumer installs @types/react@16
in their project, but a newer version of @types/react
is available on npm, the peer dependency may help the package manager choose @types/react@16
instead of that newer version.
Similarly, chai-as-promised
has a peer dependency on chai
, so @types/chai-as-promised
should have a peer dependency on @types/chai
.
There are some cases where the upstream package does not have a peer dependency on the types package, but a peer dependency is still appropriate.
These are typically cases where the upstream package extends another package and assumes it exists, so should have declared a peer dependency as it extends another package, but did not.
For example, chai-match-pattern
extends chai
, but does not declare a peer dependency on chai
, but needs it to function. @types/chai-match-pattern
should have a peer dependency on @types/chai
.
If a package simply exposes types from another package as a part of its API due to a regular dependency in the upstream package, it should not use a peer dependency.
For example, express
has qs
in its "dependencies"
. When users install express
, they don't need to manually install qs
. Likewise, @types/express
has @types/qs
in its "dependencies"
.
It would be incorrect to declare @types/qs
as a peer dependency of @types/express
, since that would require some downstream consumers to manually install @types/qs
.
This file defines which files are to be included in each @types
package. It must take a specific form. For packages with only one version in the repo:
*
!**/*.d.ts
!**/*.d.cts
!**/*.d.mts
!**/*.d.*.ts
Which is to say "ignore all files, but don't ignore any declaration files". For packages that have more than one version in the repo, the "latest" version (at the top level) should contain something like:
*
!**/*.d.ts
!**/*.d.cts
!**/*.d.mts
!**/*.d.*.ts
/v15/
/v16/
/v17/
Which is the same as the previous .npmignore
but ignoring each of the versioned child directories.
CI will fail if this file contains the wrong contents and provide the intended value. No matter what this file contains, the publisher will only publish declaration files.
pnpm dprint fmt -- 'path/to/package/**/*.ts'
.
.vscode/settings.template.json
(or equivalent for other editors) to format on save with the VS Code dprint extension
function sum(nums: number[]): number
: Use ReadonlyArray
if a function does not write to its parameters.interface Foo { new(): Foo; }
:
This defines a type of objects that are new-able. You probably want declare class Foo { constructor(); }
.const Class: { new(): IClass; }
:
Prefer to use a class declaration class Class { constructor(); }
instead of a new-able constant.getMeAT<T>(): T
:
If a type parameter does not appear in the types of any parameters, you don't really have a generic function, you just have a disguised type assertion.
Prefer to use a real type assertion, e.g. getMeAT() as number
.
Example where a type parameter is acceptable: function id<T>(value: T): T;
.
Example where it is not acceptable: function parseJson<T>(json: string): T;
.
Exception: new Map<string, number>()
is OK.Function
and Object
is almost never a good idea. In 99% of cases it's possible to specify a more specific type. Examples are (x: number) => number
for functions and { x: number, y: number }
for objects. If there is no certainty at all about the type, any
is the right choice, not Object
. If the only known fact about the type is that it's some object, use the type object
, not Object
or { [key: string]: any }
.var foo: string | any
:
When any
is used in a union type, the resulting type is still any
. So, while the string
portion of this type annotation may look useful, it in fact offers no additional typechecking over simply using any
.
Depending on the intention, acceptable alternatives could be any
, string
or string | object
.TL;DR: do not modify
.github/CODEOWNERS
, always modify list of the owners inpackage.json
.
DT has the concept of "Definition Owners" which are people who want to maintain the quality of a particular module's types.
To add yourself as a Definition Owner, modify the owners
array in package.json
:
"owners": [
{
"name": "Some Person",
"githubUsername": "somebody"
},
{
"name": "Some Corp",
"url": "https://example.org"
}
]
Note that this list is not used to provide credit for contributions; it is only used for managing PR reviews.
Once a week the Definition Owners are synced to the file .github/CODEOWNERS which is our source of truth.
Definitely Typed is one of the most active repositories on GitHub. You might have wondered how the project came to be. @johnnyreilly wrote a history of Definitely Typed. It tells the story of the early days of Definitely Typed, from a repository created by @borisyankov, to the point where it became a pivotal part of the TypeScript ecosystem. You can read the story of Definitely Typed here.
The master
branch is automatically published to the @types
scope on npm thanks to DefinitelyTyped-tools.
It depends, but most pull requests will be merged within a week. Some PRs can be merged by the owners of a module and they can be merged much faster. Roughly:
PRs which only change the types of a module and have corresponding tests changes will be merged much faster
PRs that have been approved by an owner listed in the definition's package.json
are usually merged more quickly; PRs for new definitions will take more time as they require more review from maintainers. Each PR is reviewed by a TypeScript or Definitely Typed team member before being merged, so please be patient as human factors may cause delays. Check the Pull Request Status Board to see progress as maintainers work through the open PRs.
For changes to very popular modules, e.g. Node/Express/Jest which have many millions of downloads each per week on npm, the requirements for contributions are a bit higher. Changes to these projects can have massive ecosystem effects and so we treat changes to them with a lot of care. These modules require both a sign-off from a DT maintainer and enthusiastic support from the module owners. The bar for passing this can be quite high and often PRs can go stale because it doesn't have a champion. If you're finding that no-one is committing, try to make your PR have a smaller focus.
npm packages should update within an hour. If it's been more than an hour, mention the PR number on the Definitely Typed channel on the TypeScript Community Discord server and the current maintainer will get the correct team member to investigate.
<reference types="" />
or an import?If the module you're referencing is a module (uses export
), use an import.
If the module you're referencing is an ambient module (uses declare module
) or just declares globals, use <reference types="" />
.
tsconfig.json
that is missing "noImplicitAny": true
, "noImplicitThis": true
or "strictNullChecks": true
.Then they are wrong and we've not noticed yet. You can help by submitting a pull request to fix them.
Yes, using dprint. We recommend using a dprint extension for your editor.
Alternatively, you can enable a git hook which will format your code automatically. Run pnpm run setup-hooks
. Then, when you commit, dprint fmt
command will be executed on changed files. If you take advantage of partial clone, make sure to call git sparse-checkout add .husky
to check out the git hooks before running the setup-hooks
script.
Pull requests do not require correct formatting to be merged. Any unformatted code will be automatically reformatted after being merged.
💡 If you're a VS Code user, we suggest copying the
.vscode/settings.template.json
file to.vscode/settings.json
. That template sets the dprint VS Code extension as the default formatter in the repo.
Here are the currently requested definitions.
If types are part of a web standard, they should be contributed to TypeScript-DOM-lib-generator so that they can become part of the default lib.dom.d.ts
.
If there's no source JavaScript code at all, for example if you're writing helper types or types for a spec, you should publish the types yourself, not on Definitely Typed.
Because they're meant to provide types for existing JavaScript code, @types
packages are not meant to be imported directly.
That is, you shouldn't create a Definitely Typed package that's meant to be used like import type { ... } from "@types/foo"
.
Nor should you expect to write import type { ... } from "foo"
when there's no foo
installed.
This is different from providing types for a browser only JavaScript library or types for an entire environment like node, bun, et al.
There, the types are either resolved implicitly or using /// <references types="foo" />
.
Some packages, like chai-http, export a function.
Importing this module with an ES6 style import in the form import * as foo from "foo";
leads to the error:
error TS2497: Module 'foo' resolves to a non-module entity and cannot be imported using this construct.
This error can be suppressed by merging the function declaration with an empty namespace of the same name, but this practice is discouraged. This is a commonly cited Stack Overflow answer regarding this matter.
It is more appropriate to import the module using the import foo = require("foo");
syntax.
Nevertheless, if you want to use a default import like import foo from "foo";
you have two options:
--allowSyntheticDefaultImports
compiler option if your module runtime supports an interop scheme for non-ECMAScript modules, i.e. if default imports work in your environment (e.g. Webpack, SystemJS, esm).--esModuleInterop
compiler option if you want TypeScript to take care of non-ECMAScript interop (since TypeScript 2.7).export =
, but I prefer to use default imports. Can I change export =
to export default
?Like in the previous question, refer to using either the --allowSyntheticDefaultImports
or --esModuleInterop
compiler options.
Do not change the type definition if it is accurate.
For an npm package, export =
is accurate if node -p 'require("foo")'
works to import a module and export default
is accurate if node -p 'require("foo").default'
works to import a module.
Then you will have set the minimum supported version by specifying "minimumTypeScriptVersion": "X.Y"
in package.json
.
However, if your project needs to maintain types that are compatible with, say, 3.7 and above at the same time as types that are compatible with 3.6 or below, you will need to use the typesVersions
feature.
You can find a detailed explanation of this feature in the official TypeScript documentation.
Here's a short example to get you started:
You'll have to add typesVersions
to package.json
:
{
"private": true,
"types": "index",
"typesVersions": {
"<=3.6": { "*": ["ts3.6/*"] }
}
}
Create the sub-directory mentioned in the typesVersions
field inside your types directory (ts3.6/
in this example).
ts3.6/
will support TypeScript versions 3.6 and below, so copy the existing types and tests there.
Back in the root of the package, add the TypeScript 3.7 features you want to use.
When people install the package, TypeScript 3.6 and below will start from ts3.6/index.d.ts
, whereas TypeScript 3.7 and above will start from index.d.ts
.
You can look at bluebird for an example.
This may belong in TypeScript-DOM-lib-generator. See the guidelines there.
If the standard is still a draft, it belongs here.
Use a name beginning with dom-
and include a link to the standard as the "Project" link in package.json
.
When it graduates draft mode, we may remove it from Definitely Typed and deprecate the associated @types
package.
NOTE: The discussion in this section assumes familiarity with Semantic versioning
Each Definitely Typed package is versioned when published to npm.
The DefinitelyTyped-tools (the tool that publishes @types
packages to npm) will set the declaration package's version by using the major.minor.9999
version number listed in package.json
.
For example, here are the first few lines of Node's type declarations for version 20.8.x
at the time of writing:
{
"private": true,
"name": "@types/node",
"version": "20.8.9999"
}
Because the version is listed as 20.8.9999
, the npm version of the @types/node
package will also be 20.8.x
.
Note that the version in package.json
should only contain major.minor
version (e.g. 10.12
) followed by .9999
.
This is because only the major and minor release numbers are aligned between library packages and type declaration packages. (The .9999
is to ensure that local @types
packages are always newest during local development.)
The patch release number of the type declaration package (e.g. .0
in 20.8.0
) is initialized to zero by Definitely Typed and is incremented each time a new @types/node
package is published to npm for the same major/minor version of the corresponding library.
Sometimes type declaration package versions and library package versions can get out of sync. Below are a few common reasons why, in order of how much they inconvenience users of a library. Only the last case is typically problematic.
@types
packages, then npm update
should typically just work.❗ If you're updating type declarations for a library, always set the major.minor
version in package.json
to match the library version that you're documenting! ❗
Semantic versioning requires that versions with breaking changes must increment the major version number.
For example, a library that removes a publicly exported function after its 3.5.8
release must bump its version to 4.0.0
in its next release.
Furthermore, when the library's 4.0.0
release is out, it's Definitely Typed type declaration package should also be updated to 4.0.0
, including any breaking changes to the library's API.
Many libraries have a large installed base of developers (including maintainers of other packages using that library as a dependency) who won't move right away to a new version that has breaking changes, because it might be months until a maintainer has time to rewrite code to adapt to the new version. In the meantime, users of old library versions still may want to update type declarations for older versions.
If you intend to continue updating the older version of a library's type declarations, you may create a new subfolder (e.g. /v2/
) named for the current (soon to be "old") version and copy existing files from the current version to it.
When creating a new version folder, ensure that the version field of package.json
has been updated; pnpm
will automatically resolve to this versioned package whenever it's needed. If other packages in the repo need to depend on this new version, ensure that their package.json
s are also updated too.
For example, if we are creating types/history/v2
, its package.json
would look like:
{
"private": true,
"name": "@types/history",
"version": "2.4.9999"
}
Another package may select this version by specifying:
{
"private": true,
"name": "@types/browser-sync",
"version": "2.26.9999",
"dependencies": {
"@types/history": "^2"
}
}
Also, /// <reference types=".." />
will not work with path mapping, so dependencies must use import
.
@types
packages always type packages of the same version, so @types/foo@5.4.x
are for foo@5.4.x
.
As a consequence, all changes, breaking or not, are published as patch revisions, unless paired with a major/minor bump to change the package version being targeted (coincidentally or not).
When it comes to breaking changes, DT maintainers consider the popularity of the package, the upsides of the proposed breaking change, the effort that will be required for users to fix their code, and whether the change could reasonably be delayed until it can be synced with a major bump of the upstream library.
The TypeScript handbook contains excellent general information about writing definitions and also this example definition file which shows how to create a definition using ES6-style module syntax, while also specifying objects made available to the global scope. This technique is demonstrated practically in the definition for big.js
, which is a library that can be loaded globally via script tag on a web page or imported via require or ES6-style imports.
To test how your definition can be used both when referenced globally or as an imported module, create a test
folder and place two test files in there. Name one YourLibraryName-global.test.ts
and the other YourLibraryName-module.test.ts
. The global test file should exercise the definition according to how it would be used in a script loaded on a web page where the library is available on the global scope - in this scenario you should not specify an import statement. The module test file should exercise the definition according to how it would be used when imported (including the import
statement(s)). If you specify a files
property in your tsconfig.json
file, be sure to include both test files. A practical example of this is also available on the big.js
definition.
Please note that it is not required to fully exercise the definition in each test file - it is sufficient to test only the globally accessible elements on the global test file and fully exercise the definition in the module test file or vice versa.
Types for a scoped package @foo/bar
should go in types/foo__bar
. Note the double underscore.
This project is licensed under the MIT license.
Copyrights on the definition files are respective of each contributor listed at the beginning of each definition file.